Telford Heat Pump Cylinders

These Telford heat pump cylinders are designed and made in the UK. They are made from stainless steel and are unvented, or pressurised cylinders, meaning that the water inside them is used directly at the showers and taps in your house, with the heat pump heating that water via  a coil. They come with a 3kW immersion fitted, and an unvented fitting kit which includes an expansion vessel, safety valves and so on. 

The heat pump coil is large bore (DN 32) and has a surface area of 3m2 - meaning it is suited to the higher flow rates and lower flow temperatures at which heat pumps operate most efficiently. 

There are options for extra solar solar/biomass coils, slimline versions, horizontal versions, preplumbed versions, as well as tank-on-tank cylinder which combine a heat pump buffer, with the cylinder sat on top as a single, space-saving unit. 

Model Height Weight Diameter
Tempest Heat combined buffer and heat pump hot water cylinder
Tempest tank-on-tank 50L buffer and 170L heat pump hot water cylinder 1315mm 79kg 580mm
Tempest tank-on-tank 50L buffer and 200L heat pump hot water cylinder 1430mm 88kg 580mm
Tempest tank-on-tank 50L buffer and 250L heat pump hot water cylinder 1780mm 98kg 580mm
Tempest tank-on-tank 50L buffer and 300L heat pump hot water cylinder 2040mm 110kg 580mm
Tempest Heat Pump
Tempest 200L heat pump hot water cylinder 1500mm 46kg 554mm
Tempest 250L heat pump hot water cylinder 1800mm 55kg 554mm
Tempest 300L heat pump hot water cylinder 1780mm 61kg 580mm
Tempest 400L heat pump hot water cylinder 1590mm 68kg 660mm
Tempest 500L heat pump hot water cylinder 1835mm 75kg 660mm
Tempest Heat Pump twin coil
Tempest 300L heat pump twin coil hot water cylinder 1780mm 63kg 580mm
Ask a Question

Downloads